McDATA 4300 - Manual (Page 52)

2
2-18 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
Figure 2-9 CLI View
Enable or Disable
Host Control Perform this procedure to configure the open systems management
server and enable OSI host control of the product. Implementing and
enabling OSI host control requires installation of a SAN management
application on the OSI server. Applications include Veritas
®
SANPoint™ Control or Tivoli ® NetView ® . To enable or disable OSMS
host control:
1. Select OSMS from the Configure menu at any view. The OSMS
View displays ( Figure 2-10 ).
Figure 2-10 OSMS View
2. Perform one of the following:
• Click Enable to activate OSMS.
• Click Disable to deactivate OSMS.