System menu “system – Seiko Instruments SII Black-and-White Raster Plotter LP-1020 User Manual
Page 107
3-17
Chapter 3 Menu overview
System menu “SYSTEM”
Press the
key on the display below to enter the System menu.
The system will be reset after these changes are made.
▼Menu screen
Menu
Item
Function
COMM. PARAM
Sets the communication parameters.
WEB LOCK
Sets whether to allow setup privileges from the web
browser to User administrator and above.
ENABLE SERIES
Sets the media series to be used in this device.
System
APPLY ROLL
Sets the roll sizes for each media series you use in this
device.
CHINA SIZE
Sets the roll sizes to be used in China in this device.
INITIAL SET
Sets all parameter settings to their initial values.
LANGUAGE
Switches the language on the LCD message display.
LENGTH UNITS
Switches the length uint (millimeter or inch).
ADMIN PASSWORD Specifies the administrator password. This password
prevents the settings of the plotter from being changed.
Press the
key.
M E N U
# S Y S T E M
S Y S T E M
# C O M M . P A R A M