Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 34)

1-10
Extends spool memory.
Spool memory is the memory needed to receive plotting data.
If plots cannot be produced normally due to spool memory
shortage, installing the following options allows plots to be
produced normally.
Expansion kit
LP-815
Note
■Spool memory configuration when LP-815 is installed
Spool memory configuration
Spool memory configurations are available for this device as specified
below.
◆The maximum capacity to be actually spooled is slightly
different from the values indicated in the above table.
Confirm the capacity by executing “MENU PRINT.”
Notes
◆Store the paper in a cool dark place with in the specified
humidity ranges.
◆Store the paper in it’s packaging material so that dust will not
accumulate on the paper.
Paper storing precautions are as follows: