Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 221)

14-5
▼When an error message appears
Chapter 14 Troubleshooting
3
Open the manual paper feed holder and the fixation
door.
4
Remove the jammed paper.
1 Lift the paper guide.
2 Remove the paper gently so that toner does
not spill.
◆ The fixation is very hot. Do not touch it.
Touching the fixation could cause you to
get burned.
If the jammed paper is not visible, the paper
may be jammed inside the main body (cutter
area). See “Clearing paper jam in main body
(cutter area)” ( ⇒ page 14-7).
Manual paper feed
holder (Door 8)
Fixation door
(Door 7)
Warning