Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 168)

8-6
DSCAN SELF PLOT
Executes self-plotting of DSCAN built data format in the device.
◆ The DSCAN format is for only customers in Japan.
<Parameter (choice execution method)> : Default value
PORTn Executes self-plotting based on the setting information of the
PDL table (DSCAN) for the port n of Ethernet. Note 1)
PARA Executes self-plotting based on the setting information of the
PDL table (DSCAN) for the parallel channel. Note 2)
Note 1) Disabled ports will not be indicated. If HPGL is
not selected at the time of PDL selection.
Note 2) Parallel and USB will only be indicated when
each interface is installed.
(Sample of print)
Note