Seiko Instruments SII Black-and-White Raster Plotter LP-1020 User Manual
Page 67
2-25
Chapter 2 Basic operations
Caution
◆Do not drop and hit waste bottles containing waste toner.
Doing so may cause toner to leak.
◆Take care not to directly contact the waste toner. If the toner
gets on your skin or clothing, quickly wash it out with water.
◆Take care not to get the waste toner into your eyes or
breathe it in.
If waste toner gets into your eyes, wash your eyes out with
plenty of water and consult a physician.
Waste toner bottle replacement procedures
1
Take out a new waste toner bottle from its package and
remove the cap.
◆ This cap should be used to cover the waste toner bottle which
you are removing, so keep it at hand. ⇒ procedure 4.
2
Open the waste toner bottle door.
The waste bottle door is located at the right side of the device.
Notes
◆Replace the waste bottle after plotting has been completed.
If replacement is attempted during plotting, the plotting data
may be lost.
◆The toner inside the waste bottle cannot be re-used.
▼Replacing the waste toner bottle