Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 189)

11-5
Chapter 11 "SYSTEM" menu
▼Setting items
■Terioplot
Specifies whether to use Terioplot or not in operation.
For the operation of Terioplot, refer to Chapter 13 and the documents
supplied with the “Terioplot” software package.
●Terioplot
Specifies whether to use Terioplot or not in operation.
<Parameter (choice input method)> : Default value
OFF/ON
●Terioplot ADDR
Specifies the IP address of the computer where Terioplot is installed.
<Parameter (numerical value input method)>
000.000.000.000 to 255.255.255.255 Default value: 000.000.000.000
WEB LOCK
Specifies whether the setup authority from the WEB browser is given to a
user administrator or subordinate.
<Parameter (choice input method)> : Default value
OFF/ON