Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 241)

14-25
▼When an error message appears
Chapter 14 Troubleshooting
Service Call Errors
Description : This error message may appear if an unrecoverable
hardware or firmware failure occurs in the device.
In this case, you need call a service person to take
measures.
Measure : If the device does not recover from this error after
turning the power off and on, please notify your dealer or
our service center of the displayed error message and
error condition.
■Serial number not set
Description : This error message may appear if the serial number
checked at powering on is not specified.
■Engine error
Description : This error message may appear if the engine of the
device is faulty.
■System error
Description : This error message may appear if an unrecoverable and
exceptional system error occurs in the controller of the
device.
E S E T T H E S / N
E E N G I N E x x x x
P OW E R O F F / O N
E F F F F - F F F F
P OW E R O F F / O N
xxxx: Error code