Seiko Instruments SII Black-and-White Raster Plotter LP-1020 User Manual
Page 27
1-3
Chapter 1 Before using this device
Manual feeding
mechanism
Multiport interface
Supports a variety of
paper types
Front paper feeding/
finished drawing outlet
This device is equipped with a manual feeding print function.
(Note)
The picture quality and printing accuracy for manually fed printing cannot
be assured.
The device is equipped with an Ethernet interface and allows for
network connection to network. It can also be equipped with
both parallel interface and USB interface. In addition, 10 logical
ports can be used for the Ethernet interface, which then allows
up to 12 computers, including parallel interface and USB
interface, to be simultaneously connected.
4 types of rolls—paper, recycled paper, tracing paper, and
film—are supported.
The device has a front paper feeding and finished drawing outlet
structure. This allows for paper to be loaded and output drawings
to be processed only at the front of the device. This means that
the device requires only a small installation space.
The device was designed for simple, front operation, allowing
paper to be loaded and toner cartridges to be replaced with ease.
▼Features