Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 48)

2-6
Power off
When turning the power off, confirm that the device is in the data receive
standby mode.
1
Press the Power key on the device panel for about 1
second.
Release the key when the display reads "SHUTTING
DOWN."
When a job is present, it is automatically saved and will be printable the
next time you turn the power on.
(Only when HDD is installed)
When the shut down process has been completed, the power will turn off.
2
Turn the main power off when you are not using this
device for an extended period of time.
Press the power switch toward the symbol
(downwards).
S H U T D OW N
W A I T A M O M E N T
Note:
Even when “SHUTTING DOWN” appears, the
power will not turn off until you release the
power key.
This indicates that the
device is executing a shut
down.
Main power switch