Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 69)

2-27
Chapter 2 Basic operations
5
Attach a new waste toner bottle.
1 Insert the mouth of the waste toner bottle
onto the waste toner discharge port of the
main unit by slightly lifting it.
2 Set it onto the bottom surface and position it
so that it is stable.
After the following message appears, the device
status will return to the status before the waste
bottle was replaced.
6
Close the waste door.
W A I T A MO M E N T
▼Replacing the waste toner bottle