Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 206)

12-8
■METRIC
Specifies the metric.
<Parameter (numerical input method)>
1 to 255
Default value: 64
■ETHERNET ADDR
This is a physical address peculiar to this device.
Ethernet address of this device is "0800832Annnn."
This parameter is displayed, but cannot be specified.
■CONNECTION SPD.
Specifies the communication speed.
<Parameter (choice input method)> : Default value
AUTO Automatically recognizes 100BASE/10BASE.
100 Sets to 100BASE.
10 Sets to 10BASE.