Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 230)

14-14
C L O S E D O O R 5
Door Open
If the door is opened, the following message appears on the control panel.
■Roll 1 drawer (Door 1)
Description : The roll 1 drawer is opened.
Measure : Close the roll 1 drawer.
■Roll 2 drawer (Door 2)
Description : The roll 2 drawer is opened.
Measure : Close the roll 2 drawer.
■Manual feed drawer (Door 4)
Description : The manual feed drawer is opened.
Measure : Close the manual feed drawer.
■Cutter door (Door 5)
Description : The cutter door is opened.
Measure : Close the cutter door.
Note: See door locations on the drawing at 1-11 and 1-12.
C L O S E D O O R 1
C L O S E D O O R 2
C L O S E D O O R 4