Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 193)

11-9
Chapter 11 "SYSTEM" menu
▼Setting items
■Each size paper of each series
Specifies whether to use each size paper of the series.
A SERIES /9" SERIES /8.5" SERIES /30 ×42 SERIES /
MAP SERIES / DIN SERIES / CHINA SERIES
<Parameter (choice input method)> : Default value
OFF/ON
◆ The default value varies the INITIAL SETTING.
◆ This item is displayed only for choices which are ON in the
ENABLE SERIES of the system menu.
◆ All of the parameters of the same series cannot be set to
OFF.
◆ When a roll of each series is loaded into this device, that
parameter automatically turns ON.
Note