SEH Computertechnik TPG60 - Manual (Page 21)

Administration Methods
TPG60 User Manual 21
Configuring TPG
Parameters
TPG60 parameters can be configured easily and conveniently via the
InterCon-NetTool.
Commands can be selected via the toolbar, the shortcut menu (right
mouse button), shortcut keys, or the menu bar. This manual
describes the selection via the menu bar.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select the desired menu item from the navigation bar in the
Configuration category.
4. Change the desired parameters.
5. Click OK to confirm.
ª
The settings are saved.
By clicking the ’?’ icon (on the top right of the dialog) and by
pointing at the relevant parameter, you will get an explanation of
the parameter. Detailed information can be found in the
corresponding chapters of this manual.