SEH Computertechnik TPG60 - Manual (Page 32)

Parameter
TPG60 User Manual 32
4.2 How to Configure Parameters?
TPG60 parameters can be configured in many ways.
Configuring Parameters via the TPG Homepage
All TPG60 parameters can be configured via the TPG Homepage; see:
’Administration via the TPG Homepage’
Ö
15.
Configuring Parameters via the InterCon-NetTool
All TPG60 parameters can be configured via the InterCon-NetTool;
see: ’Configuring TPG Parameters’
Ö
21.
Configuring Parameters via an FTP Connection
You can configure all TPG60 parameters via FTP. To this purpose, you
must download the 'parameters' file to your local computer via FTP
and then edit it.
Proceed as follows:
1. Switch to the directory in which you wish to save the file.
2. Open an FTP connection to the TPG60:
Syntax: ftp <IP Address>
Example: ftp 192.168.0.123
3. Enter an arbitrary user name.
4. Enter either the TPG60 password or press ENTER if no password
has been assigned.
5. Transfer the ‘parameters’ file from the TPG60 to your local
computer:
get parameters
6. Edit the file using any text editor; see: ’Parameter List’
Ö
78.
7. Send the file back to the TPG60:
put parameters
8. Close the FTP connection:
quit