SEH Computertechnik TPG60 - Manual (Page 26)

Status Information
TPG60 User Manual 26
The following information is shown in the Job History:
• 'Status' indicates the status of the print connection. The
following statuses are possible:
'Completed' means that the TPG60 has completely forwarded the print job to the
printer.
'Pending' means that the print job has been accepted by the TPG60 but that the
data transfer has not yet started.
'Processing' means that the print job has been transferred from the TPG60 to the
printer.
'Processing stopped' means that the data transfer to the printer has been
stopped. This can occur if, for example, the printer ran out of paper. If the printer
error is fixed, data transfer will be resumed.
'Aborted' means that the print job has been aborted. This can occur if, for
example, the TPG60 has been restarted while the print job was processed.
• 'Protocol' indicates the protocol which has been used for
transferring the print data.
• 'Name' displays the name of the print job.
• 'Sender' displays the IP address of the host.
• 'Size' indicates the size (in KB) of the print job. The minimal size
that is displayed is 1 KB.
• 'Printer ID' specifies the identification number and the name of
the printer that spooled the print job.
• 'Creation time' specifies the time at which the print job was sent
to the TPG60.
• 'Duration' indicates the time needed by the TPG60 for processing
the print job. The minimal duration that is displayed is 1 second.
3.3 How to Print a Status Page?
The status page contains all the important information about the
TPG60. Before a status page can be printed, you need to specify the
printer and the data format of the status page. The data formats
ASCII, PostScript, and DATAMAX are available. The default setting is
the printer with the ID 1.
What do you want
to do?
†
’Specifying the Data Format and the Printer via the TPG
Homepage’
Ц
27