SEH Computertechnik TPG60 - Manual (Page 46)

Network and Device Settings
TPG60 User Manual 46
Adapting the Speed via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – General from the navigation bar.
4. Select the desired setting from the Ethernet settings list.
5. Click OK to confirm.
ª
The setting is saved.
5.6 How to Restart the TPG60?
Some situations make it necessary to restart the TPG60.
What do you want
to do?
†
’Restarting the TPG60 via the TPG Homepage’
Ö
46
†
’Restarting the TPG60 via the InterCon-NetTool’
Ö
46
Restarting the TPG60 via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Actions – Restart.
3. Click Restart TPG.
ª
The TPG60 is restarted.
Restarting the TPG60 via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select the TPG60 in the print server list.
3. Select Actions – Restart from the menu bar.
The Restart print server dialog appears.
4. Click Finish.