SEH Computertechnik TPG60 - Manual (Page 41)

Network and Device Settings
TPG60 User Manual 41
5.2 How to Configure TCP/IP Parameters?
The TCP/IP (Transmission Control Protocol over Internet Protocol) is
devided into two areas. The Internet Protocol (IP) is used for the
fragmentation and addressing of data and transfers the data from
the sender to the recipient. TheTransmission Control Protocol (TCP)
guarantees reliable and in-order delivery of sender to receiver data.
Upon receipt of one or more packets, the receiver returns an
acknowledgement.
You can define various parameters for an ideal integration of your
TPG60 into the TCP/IP network.
What do you want
to do?
†
’Configuring TCP/IP Parameters via the TPG Homepage’
Ö
41
†
’Configuring TCP/IP Parameters via the InterCon-NetTool’
Ö
41
Configuring TCP/IP Parameters via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – TCP/IP.
3. Configure the TCP/IP parameters; see: table 3
Ö
42.
4. Click Save to confirm.
ª
The settings are saved.
Configuring TCP/IP Parameters via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – TCP/IP from the navigation bar.
4. Configure the TCP/IP parameters; see: table 3
Ö
42.
5. Click OK to confirm.
ª
The settings are saved.