SEH Computertechnik TPG60 - Manual (Page 68)

Certificate Management
TPG60 User Manual 68
Saving CA Certificates via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Certificates.
3. Select TPG certificate.
4. Click Browse.
5. Specify the CA certificate.
6. Click Load Certificate.
ª
The CA certificate is saved in the TPG60. This may take a few
minutes.
Saving CA Certificates via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPG60 in the print server list.
3. Select Actions – Certificate – Server certificate from the menu
bar. The Certificate dialog appears.
4. Click ….
5. Specify the CA certificate.
6. Click Load.
ª
The CA certificate is saved in the TPG60. This may take a few
minutes.
8.4 How to Save Root Certificates in the TPG60?
The TPG60 offers a number of authentication methods to verify its
identity in a network. If you use the authentication method
'EAP-TLS', you must install the root certificate of the authentication
server (RADIUS) on the TPG60; see: ’How Does the TPG60
Authenticate Itself in the network via EAP-TLS?’
Ö
60.
The root certificate must be in base 64 format.