SEH Computertechnik TPG60 - Manual (Page 50)

ThinPrint® Settings
TPG60 User Manual 50
ª
The setting is saved.
Defining the Bandwidth via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – ThinPrint® from the navigation bar.
4. Tick Bandwidth.
5. Enter the desired bandwidth.
6. Click OK to confirm.
ª
The setting is saved.
6.3 How to Define Printers?
Print jobs are sent from the ThinPrint® server to the TPG60. After
the decompression of the print jobs, the TPG60 forwards the data to
the printers.
The print jobs are assigned via a printer ID. Up to six network
printers can be connected to the ThinPrint® port which is defined
via the TPG60.
What do you want
to do?
†
’Integrating Printers via the TPG Homepage’
Ö
50
†
’Integrating Printers via the InterCon-NetTool’
Ö
51
Integrating Printers via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – ThinPrint®.
3. Enter the relevant data; see: table 4
Ö
51.
4. Click Save to confirm.
ª
The setting is saved.