SEH Computertechnik TPG60 - Manual (Page 57)

Security
TPG60 User Manual 57
Once an IP sender has been defined, all undefined clients lose their
authorization.
What do you want
to do?
†
’Assigning Authorizations via the TPG Homepage’
Ö
57
†
’Assigning Authorizations via the InterCon-NetTool’
Ö
57
Assigning Authorizations via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Protection.
3. Enter the IP addresses or host names of authorized clients into
the IP sender box. (A host name can only be used if DNS was
configured beforehand.)
4. Click Save to confirm.
ª
The settings are saved.
Assigning Authorizations via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Enter the IP addresses or host names of authorized clients into
the IP sender box. (A host name can only be used if DNS was
configured beforehand.)
5. Click OK to confirm.
ª
The settings are saved.