SEH Computertechnik TPG60 - Manual (Page 51)

ThinPrint® Settings
TPG60 User Manual 51
Integrating Printers via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – ThinPrint® from the navigation bar.
4. Enter the relevant data; see: table 4
Ö
51.
5. Click OK to confirm.
ª
The settings are saved.
Table 4: Printer Parameters
6.4 How to Use the ThinPrint ® Connection Service?
The .print Connection Service sends print jobs via TCP/IP to .print
clients (i.e. the TPG60) in masked networks (NAT), for example.
The Connection Service manages the entire communication between
the ThinPrint® server and the client. This allows the connection via
masked networks as well as the assignment of the relevant print job
to the respective end device.
Parameter Description
ID A printer is identified by its printer ID.
Printer The printer name is a description and is used to distinguish the
printers. The printer can only use the .print AutoConnect
feature if a printer name was defined.
Class Printers with compatible drivers can be arranged in one class.
You can also define a printer class if you want to use the .print
AutoConnect feature.
Remote address IP address or host name of the printer (A host name can only
be used if DNS was configured beforehand.)
Port Port number for socket printing
(default = port nummer 9100)
Status page printer Indicates which printer is used to print status pages. The status
page printer can be specified via Configuration – General on
the TPG Homepage. (default = printer ID 1)