SEH Computertechnik TPG60 - Manual (Page 35)

Parameter
TPG60 User Manual 35
8. Edit the file; see: ’Parameter List’
Ö
78.
9. Save the file.
Downloading the ’Parameters’ File to one or more TPG60 using the
InterCon-NetTool
You can configure one or more TPG60 using the ’parameters’ file. For
this purpose, the file is downloaded to the TPG60.
When downloading the ’parameters’ file to several TPG60, the
parameter default settings 'IP address,' and 'Host name,' of the
respective TPG60 will be maintained. All other settings will be
overwritten by the ones in the new ’parameters’ file.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select one or more TPG60 from the print server list.
3. Select Actions – Download ’Parameters’ File from the menu bar.
4. Click Choose. The Parameter Download dialog appears, see:
figure 7
Ö
34.
5. Specify the ’parameters’ file.
6. Click Open.
7. Decide on the password option:
If the TPG60 displayed in the list are not password-protected or
protected by different passwords, activate Ask for each
password.
If the TPG60 are protected by the same password, activate Use
this password and enter the password.
8. Click Start download.
By clicking 'Start download', the selected file will be downloaded
to all TPG60 displayed in the list. If you do not want to download
the file to all TPG60, you must close the window and only select
the desired TPG60 from the print server list (see step 2).
9. Confirm the security query.