SEH Computertechnik TPG60 - Manual (Page 59)

Security
TPG60 User Manual 59
7.4 How Does the TPG60 Authenticate Itself in the
network via EAP-MD5/LEAP?
The IEEE 802.1x standard provides methods for authentication and
authorization in networks. Within the scope of the IEEE 802.1x
standard, the TPG60 supports the authentication protocol
EAP-MD5/LEAP.
You can verify the identity of the TPG60 using the authentication
method EAP-MD5/LEAP.
EAP-MD5/LEAP describes a user-based authentication method via a
RADIUS server. The TPG60 must be defined as user (with user name
and password) on a RADIUS server. The authentication method
EAP-MD5/LEAP must then be enabled on the TPG60 and the user
name and password need to be entered.
Requirements
;
The TPG60 is defined as user (with user name and password) on a
RADIUS server.
What do you want
to do?
†
’Enabling EAP-MD5/LEAP Authentication via the TPG Homepage’
Ö
59
†
’Enabling EAP-MD5/LEAP Authentication via the
InterCon-NetTool’
Ö
60
Enabling EAP-MD5/LEAP Authentication via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Protection.
3. Select Authentication.
4. Select EAP-MD5/LEAP from the Authentication list.
5. Enter the user name into the User name box.
6. Enter the password into the Password box.
7. Click Save to confirm.
ª
The settings are saved.