SEH Computertechnik TPG60 - Manual (Page 69)

Certificate Management
TPG60 User Manual 69
What do you want
to do?
†
’Saving Root Certificates via the TPG Homepage’
Ö
69
†
’Saving Root Certificates via the InterCon-NetTool’
Ö
69
Saving Root Certificates via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Certificates.
3. Select Root certificate.
4. Click Browse.
5. Select the root certificate.
6. Click Load root certificate.
ª
The root certificate is saved in the TPG60. This may take a few
minutes.
Saving Root Certificates via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Mark the TPG60 in the print server list.
3. Select Actions – Certificate – Root certificate from the menu
bar. The Certificate dialog appears.
4. Click ….
5. Enter the root certificate.
6. Click Load.
ª
The root certificate is saved in the TPG60. This may take a few
minutes.
8.5 How to Delete Certificates?
If a self-signed certificate or a CA certificate is saved in the TPG60,
the content of this certificate will be displayed under TPG
certificate. If you want to use a different certificate you must first
delete the existing certificate.