SEH Computertechnik TPG60 - Manual (Page 43)

Network and Device Settings
TPG60 User Manual 43
What do you want
to do?
†
’Configuring the Device Time via the TPG Homepage’
Ö
43
†
’Configuring the Device Time via the InterCon-NetTool’
Ö
43
Configuring the Device Time via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Time.
3. Tick SNTP.
4. Enter the IP address or the domain name of the time server into
the Time server box. (The domain name can only be used if DNS
is enabled on the device and if a DNS server was specified).
5. Select the time difference from the Time zone list.
6. Click Save to confirm.
ª
The settings are saved.
Configuring the Device Time via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – Time from the navigation bar.
4. Tick SNTP.
5. Enter the IP address or the domain name of the time server into
the Time server box. (The domain name can only be used if DNS
is enabled on the device and if a DNS server was specified).
6. Select the time difference from the Time zone list.
7. Click OK to confirm.
ª
The settings are saved.