SEH Computertechnik TPG60 - Manual (Page 40)

Network and Device Settings
TPG60 User Manual 40
Configuring DNS via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – DNS.
3. Configure the DNS parameters; see: table 2
Ö
40.
4. Click Save to confirm.
ª
The settings are saved.
Configuring DNS via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – DNS from the navigation bar.
4. Configure the DNS parameters; see: table 2
Ö
40.
5. Click OK to confirm.
ª
The settings are saved.
Table 2: DNS Parameters
Parameter Description
DNS Enables/disables DNS.
Domain name Domain name of an existing DNS server
(e.g. company.de)
Primary DNS server IP address of the primary DNS server
(e.g. 192.168.0.21)
Secondary DNS server IP address of the secondary DNS server.
The secondary DNS server is used if the primary
DNS server is not available.