SEH Computertechnik TPG60 - Manual (Page 42)

Network and Device Settings
TPG60 User Manual 42
Table 3: TCP/IP Parameters
5.3 How to Configure the Device Time?
You can set the time of the TPG60 via a time server in the network.
For this purpose, define a time zone and a SNTP server via its IP
address or domain name.
The time zone is used to equalize the difference between the
Greenwich Mean Time or UTC (Universal Time Coordinate) of the
time server and the local time.
If the time server is activated, all print jobs get a time stamp. Date
and time are then displayed under Job History.
Parameter Description
IP address IP address of the TPG60
Subnet mask Subnet mask of the TPG60
Gateway IP address of the gateway
Multicast router as gateway If this parameter has been enabled, the address of the
found multicast router will be entered automatically as
gateway address.
If disabled, the gateway address has to be entered
manually.
Host name Host name of the TPG60
Contact person Freely definable description
Location Freely definable description
DHCP
BOOTP
ARP/PING
ZeroConf Enables or disables the protocols DHCP, BOOTP,
ARP/PING, and ZeroConf.
Protocols offer various possibilities to save the IP
address in the TPG60.
(See ’Saving the IP Address in the TPG60’
Ö
11.)
Please disable all options that you do not need.
Bonjour Bonjour allows the automatic recognition of computers,
devices, and network services in TCP/IP-based
networks.