SEH Computertechnik TPG60 - Manual (Page 45)

Network and Device Settings
TPG60 User Manual 45
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – General from the navigation bar.
4. Select the desired language from the TPG language list.
5. Click OK to confirm.
ª
The settings are saved.
5.5 How to Adapt the Speed to the Network
Components?
You can adapt the speed of the TPG60 to other network
components, such as switches or hubs.
The 'Auto' mode is preset. The speed is identified automatically and
adapted to the other network components.
If you set the speed manually, the speed must correspond to the
speed of the other network components. It is not possible to
operate the TPG60 with full duplex if the hub is operated with
half duplex.
What do you want
to do?
†
’Adapting the Speed via the TPG Homepage’
Ö
45
†
’Adapting the Speed via the InterCon-NetTool’
Ö
46
Adapting the Speed via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – General.
3. Select the desired setting from the Ethernet settings list.
4. Click Save to confirm.
ª
The setting is saved.