SEH Computertechnik TPG60 - Manual (Page 27)

Status Information
TPG60 User Manual 27
†
’Specifying the Data Format and the Printer via the
InterCon-NetTool’
Ö
27
†
’Printing the Status Page via the InterCon-NetTool’
Ö
28
†
’Printing the Status Page via an FTP Connection’
Ö
29
†
’Printing the Status Page via the TPG60 Status Button’
Ö
29
Specifying the Data Format and the Printer via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – General.
3. Select the desired data format from the Status page mode list.
4. Select the desired printer ID from the Status Page Printer list.
5. Click Save to confirm.
ª
The settings are saved.
Specifying the Data Format and the Printer via the
InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – General from the navigation bar.
4. Select the desired data format from the Status page mode list.
5. Select Configuration – ThinPrint® from the navigation bar.
6. Tick Status Page Printer for the desired printer.
7. Click OK to confirm.
ª
The settings are saved.