Paradyne 3160 - Manual (Page 155)

Configuration Options
C-11 3160-A2-GB21-80 March 1999
Table C-4. DTE Channel Configuration Options
DTE Channels:
Assign Voice
DTE Drop/Insert (DSX-1) Channel. Assigns DS0 channels from the DTE Drop/Insert
(DSX-1) interface to DS0 channels on the network interface, and specifies which DS0
channels carry voice signaling information.
Assign – Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface.
Voice – Specifies which DS0 channels from the DTE Drop/Insert (DSX-1) interface are
voice channels and should pass Robbed Bit Signaling (RBS) information to the network
interface.
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14
N15 ... N24
– – – – – – – – – – – – – –
– ... –
DTE Drop/Insert (DSX-1) Channel Allocation. Assigns DS0 channels from the DTE
Drop/Insert (DSX-1) interface to the network interface.
Line 1 displays the 24 channels for the network interface. Line 2 displays what is
allocated to the DS0 channel indicated in Line 1. Possible values for Line 2 are:
Value Meaning
– This DS0 channel is not allocated. You can modify this value on this
screen.
Prt n This DS0 channel is allocated to port n, where n is a number from
1 to 4. You cannot modify this value on this screen.
D n This DS0 channel is allocated to the DTE Drop/Insert (DSX-1)
interface DS0 channel
n, where n is a number from 1 to 24. You can
modify this value on this screen.
Assign DTE channels to network channels by pressing the Function key below the
network channel desired. The DTE channel number scrolls up one number each time
you press the Function key. Only unassigned DTE channels appear during scrolling.
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12
D13 ... D24
RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS
RBS ... RBS
Specify DTE Drop/Insert (DSX-1) Voice Channels. Specifies which DS0 channels from
the DTE Drop/Insert (DSX-1) interface are voice channels and should pass Robbed Bit
Signaling information to the network interface.
Line 1 displays the 24 channels for the DTE Drop/Insert (DSX-1) interface. Line 2
displays whether the DS0 channel indicated in Line 1 is a voice or data channel.
Possible values for Line 2 are:
Value Meaning
RBS This DS0 channel is a voice channel carrying RBS information. When
this DS0 channel is assigned to a network DS0 channel, RBS
information is preserved across the connection.
Data This DS0 channel is a data channel that does not contain RBS
information. Signaling is not preserved across the connection.
Press the Function key below the desired channel to toggle between RBS and Data.