Paradyne 3160 - Manual (Page 78)

Operation
3-44 3160-A2-GB21-80 March 1999
2. From the DTE Channels screen, press F2 to select Voice.
F1
DTE Channels:
Assign Voice
F2 F3
3. Line 1 displays the 24 DS0 channels for the DTE Drop/Insert (DSX-1)
interface. Pressing the or key scrolls the channels onto the screen in
groups of three. Line 2 displays whether the DS0 channel in Line 1 is a data
channel (Data) or a voice (RBS) channel. Each time that you press the
Function key located below the desired channel, the display in Line 2 toggles
between Data and RBS.
F1
D1 D2 D3
RBS RBS RBS
F2 F3
Clearing DS0 Channel Allocation
You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface, the DTE Drop/Insert (DSX-1) interface, or the synchronous
data ports.
"
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the Chan selection appears on
the screen.
5. Select Chan.
F1
Edit:
Port
NET Chan
F2 F3