Paradyne 3160 - Manual (Page 90)

Operation
3-56 3160-A2-GB21-80 March 1999
4. From the Call Setup screen, select ChDir.
F1
Call Setup:
Pass
Dial ChDir
F2 F3
The Directory 1 displays first, along with its phone number if one has been
entered.
5. Press F1 (Next) to display the next directory (2, in this case). Press F2
(Previous) to display the previous directory (A, in this case). Directories
appear in order, 1 through 5 and then A.
F1
1: xxxxxxxxxxxxxxxxx
Next
Prev Edit
F2 F3
6. Press F3 (Edit) to change the displayed directory’s phone number (phone
numbers can be up to 40 characters). If you select Edit, the Edit screen
appears.
F1
1: xxxxxxxxxxxxxxxxx
Next
Prev Edit
F2 F3
7. Use the and keys to position the cursor under the digit(s) you want to
change. Press F1 to scroll up to a higher digit. Press F2 to scroll down to a
lower digit. The
key inserts blanks (default characters) while the key
invokes the End Of Number (EON) character which terminates the dial string
and erases any characters to the right when you use the Save function.
See Table 3-6 for the set of valid characters and rules that apply to entering
phone numbers.
Example: P9W8135551212
8. Press F3 (Save) to store your changes in nonvolatile memory. If you press
or before saving the phone number you just changed, the previous
phone number remains in effect.
F1
1: xxxxxxxxxxxxxxxxx
Up
Down Save
F2 F3