Paradyne 3160 - Manual (Page 169)

Configuration Options
C-25 3160-A2-GB21-80 March 1999
Table C-7. User Interface Configuration Options (8 of 10)
Modem Rate: 2.4
Next 1.2 2.4 Prev
Modem Port Rate. Configures the bit rate for the modem port.
1.2 – Sets the bit rate at 1200 bps.
2.4 – Sets the bit rate at 2400 bps.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
MChar Len: 8
Next 7 8 Prev
Modem Character Length. Configures the character length (number of data bits) for the
modem port. This does not include the start bit (always 1) or the stop bits; 8 is the
factory default.
NOTES: – This configuration option is available on standalone DSU/CSUs
only.
F
– This option must be set to 8 to perform PC emulation or pass-through
operations, or SNMP management.
MParity: None
Next None Even Odd Prev
Modem Parity. Configures the parity for the modem port. None is the factory default.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
MStop Bits: 1
Next 1 2 Prev
Modem Port Stop Bits. Configures the number of stop bits for the modem port; 1 is the
factory default.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F
LSpaceDsc: Disab
Next Enab Disab Prev
Long Space Disconnect. Specifies how the modem disconnects a call. This makes call
disconnecting more robust and prevents invalid data at the remote modem if the call is
disconnected. To be effective, the remote modem must be configured to disconnect if it
detects continuous space.
NOTES: – This configuration option is available on standalone DSU/CSUs
only.
F
– This configuration option is not available if the modem port is configured
as an SNMP management link and the link is configured for
synchronous operation.
MoInActTm: Disab
Next Enab Disab Prev
Modem Port Inactivity Timeout. Specifies whether the modem port disconnects after a
period of inactivity specified by the MoDiscTm configuration option.
Enab – The modem port disconnects after the period of inactivity specified by the
MoDiscTm configuration option.
Disab – The modem port does not disconnect due to inactivity.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F