Paradyne 3160 - Manual (Page 92)

Operation
3-58 3160-A2-GB21-80 March 1999
"
Procedure
To initiate front panel pass-through at the near-end DSU/CSU:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
F1
Control:
Call
Rel LED
F2 F3
4. From the Call Setup screen, select Pass.
F1
Call Setup:
Pass
Dial ChDir
F2 F3
5. From the Pass Directory screen, press F1 (Up) to display the next higher
numbered directory or press F2 (Down) to select the next lower numbered
directory.
F1
Pass n: xxxxxxxxx
Up Down Dial
F2 F3
6. When the number of the desired directory appears on the screen, press F3
(Dial) to place the call.
F1
Pass n: xxxxxxxxx
Up Down Dial
F2 F3