Snmp mib objects, Overview, Appendix e – Paradyne 3160 User Manual

Page 213

Advertising
background image

E-1

3160-A2-GB21-80

March 1999

SNMP MIB Objects

E

Overview

This appendix describes the Management Information Base (MIB) objects that
are supported by the DSU/CSU and provides a correlation between front panel
commands and MIB objects (

Table E-1

).

The DSU/CSU supports the following MIBs:

H

MIB II

– Defines the general objects for use in Transmission Control

Protocol/Internet Protocol (TCP/IP) internets and provides general
information about the DSU/CSU.

H

DS1/E1 MIB

– Defines objects for managing DS1 interfaces and supports the

network and DTE Drop/Insert (DSX-1) interfaces on the DSU/CSU.

H

RS-232-like MIB

– Defines objects for managing RS-232-type interfaces and

supports synchronous data ports (PORTs 1– 4) and management
communication ports (AUX, MODEM, and COM ports) on the DSU/CSU.

H

Generic-Interface MIB

Extensions

– An extension to MIB II that defines

additional objects for control of generic interfaces in MIB II. It supports control
of tests on the DTE Drop/Insert (DSX-1) and synchronous data interfaces
that are not supported by other MIBs.

H

Enterprise MIB

– Defines objects that are unique to devices such as Model

316x DSU/CSUs.

Advertising
This manual is related to the following products: