Planet Technology IPX-2000 - Manual (Page 106)

Figure 6-1
․ There are staff phones in cubes and offices, and utility phones in public areas.
․ Each phone has one extension, and can call any extension without limitation.
․ Only staff phones can call out to PSTN with a prefix 9.
․ Incoming PSTN calls are answered by auto attendant and could be transferred to any extension.
Configuration steps:
1. Create usergroups named staff, utility, and ext-all.
2. Add staff and utility in the Reachable User Groups of ext-all.
3. Create a user account for each staff and assign it to usergroup staff.
4. Create an additional user account named public and assign it to usergroup utility.
5. Create a device for each physical phone and designate an extension.
6. Assign extensions of staff phones to cor sers.
utility phones to share the same user public.
of digits stripped “1”, and no prefix.
xtension, and select ext-all
t as outbound routegroup,
able User Group; while for usergroup
responding u
7. Assign all extensions of
8. Create a route, named pstn with pattern “9.” number
9. Create a routegroup named pstn-out, and add route pstn only.
10. Create a PSTN trunk with ID “1”, port “1-2”, do not select any DID of e
as the usergroup of privilege.
11. Return to usergroup configuration. For usergroup staff, choose pstn-ou
click pstn1 in Associated Trunks, and select utility in Reach
utility, only select staff in Reachable User Group.
12. Reload the IP PBX Service.
95