Planet Technology IPX-2000 - Manual (Page 70)

The SIP Trunk Management page allows the administrator to configure SIP trunks used by IP PBX.
Select Trunk -> SIP Trunk, and one can add, edit, delete and search SIP trunks. Go to Service -> IP
PBX Service, and click Reload to activate changes.
6.6.1 Add a SIP Trunk
1. Click the Add New tab.
2. Enter settings shown in Table 6-10.
3. Click Add to see the newly added SIP trunk in the Trunk Identifier.
6.6.2 Edit a SIP Trunk
1. Click an identifier in Trunk Identifier.
2. Edit settings shown in Table 6-10.
3. Click Apply to change the information.
6.6.3 Clone a SIP Trunk
1. Click an identifier in Trunk Identifier.
2. Click Clone.
3. Edit settings shown in Table 6-10.
4. Click Add to see the updated information.
6.6.4 Delete a SIP Trunk
1. Click the Trunks tab, and select a trunk identifier.
2. Click Delete to remove the SIP trunk from the Trunk Identifier.
6.6.5 Search a SIP Trunk
1. Type a trunk identifier in the Search box, or click a trunk identifier in Group ID list.
2. Click Go to see the Update page.
Table 6-10 SIP Trunk Configuration Settings
Field Description
Trunk Identifier A unique number consisting of digits only. Usually give the phone
number issued by the ITSP for consistency.
Description Arbitrary description information.
59