Planet Technology IPX-2000 - Manual (Page 30)

the POTS Setting page before configuration.
Description Arbitrary description information.
Port Selection Select to search for an available port in the group. Rotating
means to force ports being selected in turns to even cost.
DID Type DID means direct inward dialing (also called DDI in Europe).
Select a preferred type, None DID, Extension DID, DID by
Number DID by Privilege or Centrex DID from the list and
then enter configuration in DID Prefix and DID Stripping to
have the incoming calls directed to the corresponding trunk.
None DID When selected None DID, all incoming calls will enter IVR
system instead of directly dial to a specified extension.
Select a preferred IVR from IVR list for this trunk.
Extension DID When selected Extension DID, select an extension in the
list to be an unconditional destination for incoming calls to
this trunk. If prefix or stripping has been given, the result of
digit manipulation is dialed in a DTMF string after the call
has been answered by the DID extension as an automatic
2 nd dialing.
)
If you set a DID extension in a trunk, then only that
extension can use this trunk to call out, and all incoming
calls to this trunk will connect to that extension directly.
DID By Number When selected DID By number, enter configurations in DID
Prefix and DID Stripping to have the incoming calls
directed to the corresponding extension derived by number
manipulation. The SIP trunk numbers is therefore regarded
as the direct line of the extension.
DID By Privilege When selected DID By Privilege, select a usergroup in the
list as the privilege of inbound calls from this trunk. Enter
configuration in DID Prefix and DID Stripping to have the
incoming calls redirected to dial out.
DID Prefix A digit string to be prefixed to the incoming called number
after stripping.
DID Stripping A number of leading digits to be stripped from the original
called number. Click All to strip all digits of the original called
number.
19