Planet Technology IPX-2000 - Manual (Page 108)

Figure 6-2
Configuration steps in B-HQ:
1. Create usergroups named staff, utility, and ext-all.
2. Add staff and utility in the Reachable User Groups of ext-all.
3. Create a user account for each staff and assign it to usergroup staff.
ed public and assign it to usergroup utility.
7. Assign all extensions of utility phones to share the same user, public.
8. Create a route, pstn, with pattern “9Z.” with number of digits stripped “1”, no prefix.
9. 21.” with number of digits stripped “8”, prefix “9”.
4. Create an additional user account nam
5. Create a device for each physical phone and designate an extension.
6. Assign extensions of staff phones to corresponding users.
Crea , pstn-br, with pattern “901186 te a route
97