Planet Technology IPX-2000 - Manual (Page 52)

6 IP PBX Configuration
This section introduces steps to provision the IP telephony part of the IP PBX. Note that reloading
configuration is required in order to make new configuration effective
17
.
6.1 User Group Configuration
A usergroup is a logically grouping of users and their privileges. For instance, one could have couple of
usergroups in an IP telephony network, e.g. Sales, Marketing, Administration, Accounting, and
Engineering, etc. Each usergroup associates with a set of PBX features and call routing scopes. In
other words, all users in the same usergroup share the same reachability of PBX features and final
destinations.
Select User Management -> User Group, and one can add, edit, delete or search usergroups. Go to
Service -> IP PBX Service, and click Reload to activate changes.
Note: The maximum usergroup is 64 for PC#1 and 32 is for PC#2.
6.1.1 Add a User Group
1. Enter a usergroup name beside the Add button, and then click Add.
2. The name will show in Group ID.
3. Click the name in Group ID to view the edit page.
4. Enter settings shown in Table 6-1.
5. Click Back to return to the Usergroup Management page.
Now, you can see the newly added usergroup displayed in the Group ID.
6.1.2 Edit a User Group
1. Click a usergroup name in the Group ID.
2. Edit settings shown in Table 6-1.
3. Click Back to see the updated information.
6.1.3 Delete a User Group
1. Select a Group ID.
2. Click Delete to remove the usergroup from the Group ID.
17
Please refer to 5.6.1.1 for details.
41