Planet Technology IPX-2000 - Manual (Page 113)

ry Histo
isplays the commands you entered before. You can also press
↑ ↓ on the keypad to show the used
comm
9.2.
This section is for the system administrator and requires password to use these commands. For
comm
CSV (comm information of user, usergroup, IP phone, extensions, route,
route
1. Enter
2. Enter pbx terminal to start using the admin commands.
List Com
The administrator can also list items such as user, usergroup, route, routegroup, extensions, IP phone
and trunks.
Show User
Display one or all PBX users’
CLI Command: list user <Login ID> / list user
Show User
Display one or all PBX usergroup
CLI Com
Show IP
Display one or all IP phones’ information.
CLI Com <Device ID> / list ipphone
Show E
Display o
CLI Command: list ipexten <Extension Number> / list ipexten
Show A s
Display o
CLI Com ber> / list analogphone
Show Routes
Display one or all PBX routes’ information.
CLI Command: list route <Route ID> / list route
D
ands.
2.5 PBX Commands
ands in pbx, the administrator can add, edit and delete user, usergroup, and export or import
on split volume) files with the
group and SIP trunk.
enable, and then admin’s password to log in as a system administrator.
mands
s
information.
groups
s’ information.
mand: list group <Group ID> / list group
Phones
mand: list ipphone
xtensions of IP Phones
ne or all extensions’ information.
nalog Phone
ne or all analog phones’ information.
mand: list analogphone <Extension Num
102