Planet Technology IPX-2000 - Manual (Page 83)

Min/Max Duration of Off-cycle Tone Enter a time in ms for minimum or maximum duration of
off-cycle tone.
Forced Disconnection of this Duration Enter a time in ms for disconnecting the call when there is
no sound for the specific period of time. (ms) of Silence Detected
6.9.2 FXS Port Configuration Settings
cription
Table 6-14 FXS Port Configuration Settings
Field Des
Type The type of this port.
Port The ID number of physical port.
Impedance/CP Tone The Impedance/CP Tone setting determines the dial tone,
busy tone, and ringback tone to the originating party. Select
appropriate impedance/call-progress tone for the local the
region.
Default Codec Select g711ulaw or g711alaw for connecting to other
devices.
Input/Output Gain Voice amplification or attenuation in dB scale to adjust
input/output volume of a PSTN line.
Caller ID Detection Select to detect the Caller ID calling from PSTN lines.
Answering by Battery Reversal when the call is
Detection
If selected, billable time will count from
answered.
)
Please enable this function when Central Office (CO)
site provides battery reversal.
Minimum Disconnection Tone TN
ce,
Minimum volume level of the disconnection tone. If a PS
trunk is found to have disconnection problem and low-voi
choose a lower dB.
Call Time Restriction t the call period. If a
tion.
Enter a number (1-1440) in minute to limi
call lasts longer than the time, IP PBX will force to terminate
the call. Enter 0 or leave it blank to disable the func
72