Planet Technology IPX-2000 - Manual (Page 112)

Hist
Displ can also press
↑ ↓ on the keypad to show the used
comm
CLI C
Ena
Ente system will request for a password. The password is the same as the
admi in level allows to enter Admin and PBX Commands.
CLI C
Note way, or any other key to quit” will show up if
9.2.2.4
This use these commands. For
commands in art, stop and restart system services, debug SIP, and
shutdown or
1. Enter enable, and then admin’s password to log in as a system administrator.
2. Enter admin terminal art using the admin commands.
Help
Display the help message command available for the level.
Quit / Logou
LI Command: quit / logout
Exit th u are in the basic level, the console
el.
CLI C
ory
ay the commands you entered before. You
ands.
ommand: history
ble
r the admin level. The
nistrator’s password for web interface. Adm
ommand: enable
: The message “Someone login. Press ‘y’ to login any
there is an old web GUI session existing.
Admin Commands
section is for the system administrator and requires password to
admin, the administrator can st
reboot the PBX system.
to st
CLI Command: help / ?
Display the available commands after the commands you entered
CLI Command: <CLI command> ?
t
Enter the command to Logout CLI.
C
Exit
e current level and go back to the previous level. If yo
interface will logout. If you are in admin level, enter this command will disable and back to basic lev
ommand: exit
101