Planet Technology IPX-2000 - Manual (Page 75)

2. Enter settings shown in Table 6-11.
3. Click Add to see the newly added Analog PSTN trunk in Trunk Group.
6.7.2 Edit an Analog PSTN Trunk
1. Click a trunk group in Trunk Group.
2. Enter settings shown in Table 6-11.
3. Click Apply to change the information.
6.7.3 Delete an Analog PSTN Trunk
1. Click the Trunks tab, and select a trunk group.
2. Click Delete to remove the PSTN trunk from the Trunk Group.
Table 6-11 Analog PSTN Trunk Configuration Settings
Field Description
Trunk Group ID number of this PSTN trunk group. A valid number ranges
from 1 to 31. It should not overlap with existing ISDN PSTN
trunk groups.
Trunk Type Select the port type, FXO or FXS.
Trunk Ports Select one or more FXO or FXS ports for this Analog PSTN
trunk.
Description Arbitrary description information.
Port Selection Click to search for an available port in the group. Rotating
means to force ports being selected by turns to even cost.
DID Type If selecting FXO, user can see None DID, Extension DID
and DID By Privilege in the DID Type list. If selecting FXS,
users can see None DID, Extension DID and DID By
Privilege in the DID Type list.
None DID When selected None DID, all incoming calls will enter IVR
system instead of directly dial to a specified extension.
Select a preferred IVR from IVR list for this trunk.
Extension DID When selected Extension DID, select an extension in the
list to be an unconditional destination for incoming calls to
this trunk. If prefix or stripping has been given, the result of
digit manipulation is dialed in a DTMF string after the call
has been answered by the DID extension as an automatic
64