Planet Technology IPX-2000 - Manual (Page 14)

2 Managing with Web Interface
The factory default of LAN IP address is 192.168.1.1. Connect to LAN port and the configuration Web
interface is at https://192.168.1.1/ . Once connected, the browser will ask for accepting a certificate.
Click Yes to see the home page. Type in the default administrator ID and password (both are admin) to
log in for administration. The administrator password can be changed in the User Management ->
User.
1. Click admin in the Login ID.
2. Change the password in Password.
3. Click Apply to change the password.
Note: For the system security, please change the password after the first log-in.
After login, you will see four icons, Add Account Wizard, Add Route & Trunk, Mass Extensions
Adding and Customize Setup. The first three icons can lead you step by step to configure some basic
settings of IP PBX. Click the Customize Setup icon to see all the PBX configurations into detail.
Administrator can click on the top-left side of the webpage to go back to the home page of IP PBX
Web Interface.
3