Planet Technology IPX-2000 - Manual (Page 110)

9 Appendix
9.1 Keypad Default Settings for IP PBX
PBX has some default keypad settings for general users to directly access functions via the keys on IP
a phone.
Keypad Description
*6 Place a call on hold.
*7 Remove the call from hold.
*8 If extensions are in the same pickup group
30
, any extension in the pickup
group can press *8 to pick up the call in ringing state.
*8* ic extension. Pickup a call for a specif
*# + extension Press *# plus an extension number to transfer the call to the extension.
he caller from trunks press *# to transfer the call, the third party Note: When t
will see the caller ID of caller.
*# + Call Park Pilot
Number
Press *# plus Call Park Pilot Number to transfer the call to Call Park
31
.
9.2 Managing with CLI Commands
9.2.1 Introduction
CLI) administration guidelines describe how to manage some
basic functions of the IP PBX using console interface. The console interface is set for two levels,
rmation once login to the
ires entering password of the admin to use more functions such as
dd, edit and delete user, usergroup, and import or export data.
9.2.2 Console Interface
y connecting to console port, general users can see some basic information. System administrator
ter some commands for adding, editing, deleting debugging.
The IP PBX Console Interface (EST
general user and system administrator. General users can see general info
interface. System administrator requ
a
B
can en
30 r more detail of pickup group.
detail of Call Park. Refer to Table 3-4 fo
31
Refer to 7.1 for more
99