Oce North America TDS600 - Manual (Page 106)

106 Océ TDS600 Multifunctional Digital System User Manual
Introduction to Océ Print Exec LT Web
Océ Print Exec LT Web is optional software which allows you to create and
send a set of plots or drawing files to an Océ TDS printer. You can send the
settings for these jobs from your workstation, using your web browser. It also
provides basic feedback on the system, media and the print queue.
Basic concepts
The role of Océ Print Exec LT Web is to allow you to:
■
Get information on the printer configuration
■
Get information on the available media
■ Get information on pending jobs in the printer queue
■ Assemble up to 10 documents in a job
■ Prepare the basic settings which will be used for the printer
■
Submit the job to the printer.
Requirements for the user browser software
■
Microsoft Internet Explorer 4.01 (Service Pack 2) or higher
■ Netscape Navigator 4.08 or higher
Requirements for the network infrastructure
■ TCP/IP network, which connects the printer and the end user workstation
■ Port 8001 must not be filtered.
How to connect to the Océ Print Exec LT Web
▼ ▼ ▼ ▼ Connect to the Océ Print Exec LT Web
1 Enable Océ Print Exec LT Web in the Océ Settings Editor (see ‘Océ Print Exec
LT Web’ on page 191).
2 Type the following URL in your browser: http://Printername