Oce North America TDS600 - Manual (Page 97)

Special copy and scan jobs 97
▼ ▼ ▼ ▼ Copy with added filing strips along the leading and trailing edge
1 Open the ‘Layout’ card in the ‘Copy’ section.
2 Press the function button ‘Add strip’ function button.
[60] Adding strip
3 Adjust the values in mm for the trailing edge using the numeric or arrow
buttons.
4 Press the function button ‘Add strip’ again.
5 Adjust the values in mm for the leading edge using the numeric or arrow
buttons.
6 Make other settings as required.
7 Feed the original.